To verify a PSA slab before paying full price, enter the 8- to 10-digit number from the lower-right front label at PSA's Cert Verification page and confirm the record is active. Then compare the year, set, grade, scans, label, and holder details against the slab in hand. A PSA slab is a Pokemon card sealed in a tamper-evident PSA holder with a grade label. That match between database record and physical slab decides whether the price is justified.
Table of Contents
- What is the first online check?
- How do you match the slab to the record?
- What should the front label do when you tilt it?
- What should the back and holder show?
- When should you walk away and re-check?
What is the first online check?
Look for the certification number on the lower-right front label, or on an oval PSA/DNA sticker when present. According to PSA, collectors should enter that number at PSA's Cert Verification tool and confirm the record exists and is active before paying.
At a show or shop, use your phone instead of typing. Scan the back-label QR code with the PSA app's "Scan a Card" camera to open the same record, a shortcut PSA describes on its security information.
How do you match the slab to the record?
Compare card year, set, player or Pokemon, grade, and label type plus the front and back scans. PSA's example record shows how those fields and images should line up, as seen in PSA's sample certification record.
Reject the deal if anything mismatches. Counterfeiters often print a genuine number on the wrong card, so a real number alone does not prove the slab is real.
- Year and set match the card in the holder
- Pokemon name, grade, and label type match the listing
- Front and back scans match centering, whitening, and flaws
- Cert status shows active, not deactivated or missing
What should the front label do when you tilt it?
Tilt the front label left to right and watch the Lighthouse hologram turn its illumination on and off. That proprietary effect includes a hidden Collectors Universe "NASDAQ: CLCT" ticker that appears and disappears.
Also look at the wave-like background behind the printed text. According to PSA, that fugitive-ink pattern resists check-style washing and label swapping, a detail explained in PSA's label technology announcement. Dissolved, smeared, or plain-white areas point to tampering.
What should the back and holder show?
Check the back label under UV or blacklight for PSA's UV logo pattern. Then inspect the sonically sealed holder for tight, clean welds around the full edge.
Prying leaves frosting, flex marks, gaps, or glue residue. PSA notes that its seals readily reveal that damage. Do not pay full price for a loose, cloudy, scuffed-seam, or re-glued case.
When should you walk away and re-check?
Treat a lookup that says "temporarily DEACTIVATED as a precaution due to its use on a known counterfeit" as do not buy. That warning, shown in PSA's deactivation notice, means the number was reused on fake slabs.
Limits matter for expensive Pokemon cards. PSA states cert verification does not eliminate counterfeit risk, so always re-check after online receipt, and its Authenticity and Grade Guarantee applies only if the cert was active when the buyer purchased it.
You Might Also Like
- Pokemon TCG Gift Sets for December: What Buyers Should Verify First
- Is a PSA 9 or PSA 10 Charizard the Better Buy for Collectors?
- How Much Should a Graded Charizard Cost Before You Buy?