Grading companies check the surface of rare Charizard cards for scratches, dents, stains, and print flaws in the gloss and foil. A smooth original finish with unbroken color and shine earns the strongest surface assessment. Grading means professional authentication and condition scoring on a numeric scale. Surface is one of four standard areas, along with centering, corners, and edges, and it often decides the final grade on holographic cards.
Table of Contents
- What Surface Grading Covers
- Scratches and Handling Marks on Foil
- Print Lines, Spots, and Factory Flaws
- How to Inspect Surface Before Submitting
- Frequently Asked Questions
What Surface Grading Covers
Surface grading looks only at the flat faces of the card, front and back. It includes the ink layer, the holographic foil layer, and the protective gloss coating.
Tilt the card under a lamp and the surface tells its own story. Graders look for breaks in that story, such as fine lines, cloudy patches, or lifted gloss.
Scratches and Handling Marks on Foil
The foil area on a holographic Charizard shows wear first. Light hairline scratches, scuffs from sliding across a table, and small dents from fingernails all count against the surface.
Binder streaks and sleeve rub can dull the shine in one band. Whitening along edges belongs to edges, but a scratch that runs from the border into the art counts for surface.
Print Lines, Spots, and Factory Flaws
Not every surface mark comes from handling. Print lines are straight factory marks pressed into the foil, while bubbling, speckling, and missing ink occur during printing.
Graders usually treat factory flaws the same as wear for scoring purposes. A card can be pack-fresh and still lose surface points if the foil rolled with a visible line.
How to Inspect Surface Before Submitting
Use clean hands, a soft surface, and a single bright light. Hold the card by the edges and tilt it slowly so reflections move across the foil.
Do not clean, polish, or press the card to hide a mark. Altering the gloss or ink can lead to rejection, and wiping foil often adds new scratches.
- Check the foil at an angle for hairlines and scuffs
- Check flat color areas for stains, fingerprints, and gloss loss
- Check the back for scratches, rough spots, and ink dots
- Compare front and back, since both faces affect the score
Frequently Asked Questions
Does a fingerprint lower the surface grade?
A fresh fingerprint can often be lifted with a gentle air bulb, but a set stain or etched print residue remains a surface defect.
Are print lines considered damage?
Print lines are factory flaws rather than handling damage, yet they still affect surface scoring because they break the foil finish.
Should I use a magnifier for a pre-check?
A simple low-power loupe helps reveal hairlines and ink dots that room light hides, especially on dark Charizard artwork.
You Might Also Like
- How Much Is a PSA 10 Mega Rayquaza ex Special Illustration Rare Worth?
- How Many Base Set Hitmonchan Were Printed? Every Original Print, Estimated
- Why Do Pokemon TCG Grading Submissions Spike in December?